Industrial Power Connectors
|
|
|
Products |
|
 |
.156 MATE-N-LOK Connectors  Three and four position receptacles (cap) and plugs that are free hanging or panel mount. Removable, crimp snap-in contacts accept 20-10 AWG wire sizes. |
 |
4.2mm PE Series Connector System This connector system is a low cost, wire-to-wire or wire-to-board connector system on 4.2 mm x 4.2 mm centerline. The positive latch design allows for easy mating and unmating of the connectors. Available in 2-24 (even only) positions, the system offers receptacles, panel mount or free hanging plugs, and vertical or right-angle pin headers. |
 |
AMPINNERGY Wire-to-Board AMPINNERGY wire-to-board connectors provide a convenient and efficient means of delivering up to 600 VAC to component printed circuit boards and other power distribution devices in computers and peripherals, telephone systems and appliances. A polarizing pin is provided on the vertical receptacle assembly to aid in proper positioning on the pc board. The plug is equipped with positive latches to assure full and secure mating to the respective receptacle. The crimped contacts will accommodate either 10-12 AWG or 14-16-18 AWG conductors. The contacts latch firmly within the plug housing. |
 |
AMPINNERGY Wire-to-Wire AMPINNERGY wire-to-wire connectors provide a reliable and efficient means of interconnecting conductors employed to carry up to 600 VAC in power circuits or networks of various descriptions. They are stackable in four directions through the use of molded interlocking keyways and make wire routing and dressing orderly and easy to accomplish. The built-in interlocking feature provides resistance to the effects of shock and vibration, keeping the interconnection stable and secure. |
 |
AMPOWER Multi-Pin Plus Plug and receptacle housings and contacts are made from a modular mold to allow for many different configurations. Positions range from 2 to 65. Continuous current amperage ranges from 15 to 150 A. |
 |
Battery Stud Terminal Block The battery stud terminal block is ideal for industrial machinery and equipment as well as power and utility applications. This heavy-duty, over-molded stud design provides a two-pole stud block with 5/16-18 UNC-2A threads. |
 |
CPC Connectors
Circular plug and receptacle connectors in shell sizes from 11 to 37 in all plastic or metal. Positions range from 3 to 63 with a current capacity up to 50 A. Options include standard or reverse gender and sealing. |
 |
CERTI-SEAL Coax Coupling Closure The CERTI-SEAL Coax Coupling Closure is designed for direct buried splicing of coaxial cable typically found in CATV service drops. The most likely application is repair of a CATV service drop that has been accidentally damaged. The internal cavities are filled with gel which extrudes on closing to form an environmentally sealed closure suitable for direct burial. |
 |
Dynamic Series Connectors and Accessories The wire-to-wire or wire-to-board connector system is designed for use with input/output and power circuits in the power and control boards of heavy electric systems, process computers, inverters and switching power supplies. |
 |
Flexible Conduit Connectors AMP Flexible Conduit connectors are designed to connect flexible conduit to electrical panels or boxes in a variety of applications which include motor leads, compressors, commercial refrigeration units, furnaces, kitchen and laundry appliances, lighting fixtures, machine tools and industrial controls. A connector is simply screwed onto the conduit until it stops, then the connector is snapped into the knockout hole of a panel or box. No screw clamps are needed to hold the conduit in the connector and no locknut is needed to retain the connector in the panel or box. |
 |
Heavy Duty Contacts Heavy Duty Stamped and Formed (HDSF) Size 16 Pin and Socket Contacts accept a wire size range of 1420 AWG and are available with or without an insulation support barrel. The contacts have a current rating of 13 amps and an operating temperature of 40C to 120C [40F to 248F]. The application requirements are applicable to hand or automatic machine crimping tools. |
 |
Heavy Duty Starter/Battery Lugs and Connectors The butt splices and terminal lugs are color coded with a stud size of 6.35, 7.95, 9.53, or 12.70mm. |
 |
LGH Medical Application Connectors
The LGH Medical connectors, available in a choice of colors, offer a choice of crimp or posted, size 16 gold over nickel plated contacts. The connectors, available in 6, 7, or 9 positions, are flange mounted for easy installation and polarized for safe, proper mating of connector halves. |
 |
LGH Micro-Miniature Connectors and Cable Assemblies
The Micro-Miniature LGH leads and receptacles find wide applications where high voltage is used in hostile environments. These small, lightweight connectors offer high voltage performance with operating voltages up to 12 KVDC and operation to 100,000 ft. altitude. The lead wires are color coded for easy identification. |
 |
LGH Multi-Pin Connectors and Cable Assemblies
Perfect for commercial applications in industrial environments, these easy to apply connectors are rated for 10, 20 and 30 KVDC and are perfect for large volume production applications. The crimp, snap-in contacts can be machine terminated or hand tool crimped. Connectors. Some of the connectors are hermetically sealed and all have non-toxic insulation. The operating voltage range is 5-50 Kilovolts DC. |
 |
LGH Single-Pin Connectors and Cable Assemblies
LGH leads and receptacles find wide application where high voltage is used in hostile environments. LGH leads and receptacles are lightweight, miniature, extremely reliable and they maintain peak performance under high temperature, high altitude applications. They are equally applicable to low temperature, low altitude devices. |
 |
M Series Connectors
Connectors that intermate with other connectors made to MIL-C-28748 requirements. There is a wide range of styles and sizes: standard (unloaded), posted (preloaded), mixed, high voltage, and V.35. Positions range from 2 to 160. |
 |
Metrimate Connectors
AMP Metrimate connectors are true metric specification connectors designed for panel, free-hanging or pc board application. These connectors offer improvements in durability, density and electrical performance over competitive soft-shell pin and socket connectors. This versatile pin and socket connector line is designed to meet the general requirements of various testing and approval agencies, including UL, CSA, VDE and IEC. |
 |
Metrimate Drawer Connectors
These connectors offer true metric specifications for panel (front or rear mount), free-hanging or printed circuit board applications. Available in 4 through 36 positions, these square grid connectors are available with signal, power and posted contacts. Strain reliefs are available for 6 through 36 position square grid panel mount connectors. |
 |
Mini Universal MATE-N-LOK Connectors These high density headers and housings, with positions ranging from 1-24, offer a .163 inch centerline. Seals are available for splash protection. |
 |
Mini Universal MATE-N-LOK II Connectors These high density headers and housings, with positions ranging from 1-24, offers a .163 inch centerline. Seals are available for splash protection. Available for wire-to-wire and wire-to-board applications, these connectors mate with standard Mini-Universal MATE-N-LOK headers. Pins and sockets can be intermixed in the same housing although they cannot be intermixed with standard Mini-Universal Mini-Universal MATE-N-LOK housings. Three point stabilization provides terminal position assurance. |
 |
Multimate Contacts
We off a variety of pin and socket contacts for a variety of applications. The types include Type I, II, III, III+, VI, XI, XII, post contacts, CPC, Power IV, and Powerband. They terminate to printed circuit boards or wire and have a high current option. |
 |
Overhead Transmission & Distribution Products Our transmission and distribution products allow you to make quick work of new installations and repair jobs, from the power generating plant to the end customer - residential, commercial or industrial. Many of our products for power utility applications are based on the wedge-pressure technology. They consist of a wedge and a tapered "C" member. All of our wedge-pressure technology products include a means for quick, visual inspection that fully verifies proper termination. |
 |
Power Double-Lock Connectors AMP Power Double Lock connectors offer a compact design for use in power circuit applications in refrigerators, air conditioners, washing machines, gas equipment, copying machines and automatic vending machines. These connectors can be used singly by inserting wire-terminated crimp snap-in contacts into the housing. |
 |
Power Lock Connectors These high current connectors can handle 20 or 60 amperes maximum depending on the application. Contacts for Series I Connectors accept a wire size range of 18-12 AWG and contacts for Series II Connectors accept a wire size range of 10-6 AWG. |
 |
Power Series Connectors AMP Power Series Connectors provide a durable, quick connect/disconnect means to transmit "power" levels of current and voltage (15-275 A, 600 V AC/DC) and primarily comprised of single-pole and 2-pole (battery) connector housings, crimp snap-in contacts, and accessories. Two-pole housings have different polarization configurations. With the exception of black housings, each color identifies a different keying configuration. In general, only like color housings will mate. Contacts are either cold-headed or stamped and formed, depending upon the connector Series. |
 |
Signal Generation Products Our frequency modulators, voltage controlled oscillators and synthesizers are used in a wide variety of applications within aerospace and defense, wireless and broadband communications industries with a broad range of operating frequency ranges and performance specifications for these markets. |
 |
SOLARLOK (Photovoltaic) Connector Systems Connectors designed for the interconnection of individual (solar) photovoltaic modules to DC/AC converters. Junctions boxes are used to allow serial and parallel interconnections by direct wire or separate connectors. The Tyco Electronics SolKlip Ground Clip provides the photovoltaic integrator with a solution for grounding photovoltaic panels and mounting frames. |
 |
Standard Timer (AMP RAST 5 Appliance) Connectors Our IDC and crimp receptacles are used in modular connector systems with a modern in-line mating technology on a 5 mm centerline. Positions available are 2 to 12, rowable with no loss of spacing and a variety of keying possibilities. |
 |
Telecommunications Outside Plant The outside plant products include our CERTI-SEAL Coax Coupling closure, copper ground grid and grounding connectors, bonding connectors, cable connectors and cable splices. |
 |
Terminals & Connectors for the Underground Networks Tyco Electronics Energy Products offers a range of bolted and compression connectors suitable for junction, termination and tap off applications for aluminium or copper conductors. |
 |
Transmission Line Products Our transmission line product offering includes creepage extenders, link boxes, boots, power cable joints, duct sealing systems and power cable termination products. The extenders are designed to be resistant to conventional spray washing techniques and will withstand most normal handling abuse and extreme weather conditions. Link boxes are used with cable joints and terminations to provide easy access to shield breaks for test purposes and to limit voltage buildup on the sheath. The elastomeric insulating boots are molded parts that fit over the connection between the cable lug and the inline equipment bushing to provide phase-to-phase and phase-to-ground insulation. Our duct sealing system is designed for use on power cables to provide a watertight seal when used with plastic, concrete or steel ducting systems. The heat-shrinkable high-voltage terminations combine proven oil-sealing capabilities with stress-control and non-tracking technologies. |
 |
Universal MATE-N-LOK Connectors and Accessories Standard density headers and housings for Universal MATE-N-LOK connector systems. Centerline is .250" with positions ranging from 1 to 15. Seals are available for splash protection. Designed to accommodate the specific needs of the lighting industry, the positive polarization features of these connectors help prevent incorrect mating. The circular design allows the connector to pass through a 7/8 inch knock-out hole in electrical fixtures and boxes. The six-position connector accommodates most major electrical industry requirements. Primary applications include the lighting, vending and appliance industries. |
 |
Universal MATE-N-LOK II Connectors Available in 2 through 15 circuit sizes for free hanging or panel mount wire-to-wire connection, the pins and sockets can be intermixed in the same housing. These connectors mate with standard Universal MATE-N-LOK housings and printed circuit board headers. |
Follow us on:
This list is temporary. The list will not be viewable on another computer and will be deleted within 30 days.
If your browser cookies are cleared, your temporary list will be lost. You can save this list and get all of the My Part List features by becoming a registered user of the Tyco Electronics web site.
If your browser cookies are cleared, your temporary list will be lost. You can save this list and get all of the My Part List features by becoming a registered user of the Tyco Electronics web site.
