Skip to content
Home > Products > By Type > Connectors & Connector Components > Ribbon and Flat Flex Wire Connectors - Ribbon Cable

Ribbon and Flat Flex Wire Connectors - Ribbon Cable

Product Line Interface Centerline Terminating Centerline Features Document(s)
2.16 [.085] IDC Connectors
2.16 [.085] IDC Connectors
  • .085" on 2 rows
  • .100" on staggered rows
  • Available in 14, 24, 36, 50, and 64 positions
  • Plug and receptacle options
  • Mounting Options: Cable and panel
  • Ready to use strain relief covers preassembled to connectors
  • Simple one-step termination
  • Terminates 1.27 [.050] centerline 26 AWG [0.40 mm], 28 AWG [0.32 mm] and 30 AWG [0.25 mm] (solid) or 28 AWG [0.08-0.09 mm²] (stranded) wire
     
AMP-LATCH Accessories
AMP-LATCH Accessories
  • N/A
  • N/A
  • For pin connectors, universal pin and pinless headers and low profile pin headers
     
AMP-LATCH Low Profile Headers
AMP-LATCH Low Profile Headers
  • .100" x .100"
  • .100" x .100"
  • Available in 6-64 positions
  • Right-angle and vertical through-hole headers
  • Headers available with latching and without
  • Tail lengths available for .062" through .125" boards
     
AMP-LATCH Ribbon Cable Connectors
AMP-LATCH Ribbon Cable Connectors
  • N/A
  • 075" x .100"
  • 2mm x 2mm
  • .100" x .100"
  • .100" x .300"
  • .100" x .600"
  • Paddleboard
  • 2mm Receptacles
  • .100 x .100 Dip Plugs and AMP-LATCH Receptacle Connectors
  • .100 x .300 Dip Plugs
  • .100 x .600 Dip Plugs
     
AMP-LATCH Universal Headers
AMP-LATCH Universal Headers
  • .100" x .100"
  • .100" x .100"
  • Available in 6-64 positions
  • Right-angle and vertical through-hole headers
  • Headers available with latching and without
  • Vertical headers in action pin/press fit available
  • Tail lengths available for .062" through .125" boards
     
AMPMODU 50/50 Grid Connector System
AMPMODU 50/50 Grid Connector System
  • 1.27 mm x 1.27 mm
  • 6.35 mm, 8.13 mm, 9.91 mm
  • Sizes 10-100 positions - in 10 position increments
  • Surface mount system for parallel board stacking, right-angle board-to-board and cable-to-board applications
  • Non-protrusive metallic holddowns for retention
  • Polarized header and receptacle assemblies
     
AMPMODU System 50 Connector System
AMPMODU System 50 Connector System
  • 1.27 mm x 2.54 mm
  • 11.43 mm, 11.94 mm, 12.57 mm, 13.08 mm
  • Complete interconnect system in circuit sizes of 10-100 positions
  • Available in through-hole and surface mount configurations
  • Board-to-board and cable-to-board available
  • Vertical board-to-board stacking option only
  • Non-protrusive metallic holddowns for retention
     
Micro-MaTch Connectors
Micro-MaTch Connectors
  • .100" x .100" staggered
  • .050"
  • Available in 4 - 20 positions
  • Receptacles, headers and paddleboard available
  • Right-angle and vertical headers in surface mount and through-hole
  • Headers available with latching and without
  • Overview
MTA 100 Connectors
MTA 100 Connectors
  • 1.27 mm
  • 1.27 mm
  • Terminates 28-22 AWG discrete wire or notched ribbon cable
  • Flat, friction lock and fully shrouded headers offer product flexibility
  • Overview
MTA 156 Connectors
MTA 156 Connectors
  • 3.96 mm
  • 3.96 mm
  • Terminates 26-18 AWG discrete wire or notched ribbon cable
  • Flat, friction lock and fully shrouded headers offer product flexibility
  • 600V, up to 12.5A contact rating
  • Overview
Bookmark and Share
This list is temporary. The list will not be viewable on another computer and will be deleted within 30 days.

If your browser cookies are cleared, your temporary list will be lost. You can save this list and get all of the My Part List features by becoming a registered user of the Tyco Electronics web site.