| Product Line | Commercial/Military | Features | Document(s) |
|---|
| Blind Mate 2.4/2.8/3.5 Connectors |
 | | - Performance to 26 or exceeding 50 GHz
- Modular space saving blind mate series with interface designed for multiple interconnects.
- Excellent axial and radial misalignment
- Crimped using industry standard SMA tooling
- Module-to-module, and module-to-motherboard rigid mount applications; rack and panel, and module-to-motherboard float mount applications
| |
|
| DIN Series 1.0/2.3 |
 | | - Performance through 2 GHZ (at 75 Ohms) and 10 GHz (at 50 Ohms)
- Applications include high density board-to-board and I/O connections on transmission, access, mobile and data communication equipment
- Meets IEC 169-29, DIN 47275 and CECC 22 230 interface and performance specifications
- Available with thread and slide-in coupling, and an innovative latching (Quick Lock) coupling mechanism
- Full crimp cable termination
| |
|
| DIN Series 1.6/5.6 mS |
 | | - 75 ohm connector series with impedance matched performance through 8 GHz
- High performance version of DIN 1.0/2.3 connector series. Highly suitable for transmission of high bit rates.
- Used primarily as I/O connector in transmission and access equipment outside US
- Meets IEC 169-13 and CECC 22 240 interface and performance specifications
- Screw, snap-on, slide-in and latching (Quick Lock) coupling available
| |
|
| FME/SAP |
 | | - Mobile Phone Installations
- Cellular industry standard for antenna applications
| |
|
| MCX (OSX) |
 | | - Snap on connector with excellent performance to 6 GHz
- 30% smaller than traditional SMB
- Designed for GPS, automotive and wireless communications
- Conforms to MIL-39012 and European CECC specifications.
- Cable to cable, and cable to PCB versions
| |
|
| Mini BNC Connectors |
 | | - Smaller version of the popular BNC series connector with same bayonet coupling mechanism and performance through 2 GHz
- Offers 40% more interconnects in the same area.
- Ideal for telecommunications and broadband applications
- Standard BNC industry tooling
- Utilizes same PCB footprint as standard BNC on the jack side, providing a drop in replacement for DS3 telco applications.
| |
|
| OS-2.9 (2.92mm) |
 | | - Superior performance to 46 GHz
- Mechanical capability with SMA ,3.5 mm and K connectors
| |
|
| OSP Connectors |
 | | - 50 ohm Impedance
- High-performance microwave system requirements
- For semi-rigid cable
- Interface designed for multiple interconnects
- Bulkhead or panel mount
| |
|
| QMA Connectors |
 | | - Same performance as standard SMA through 6 GHz
- Snap on feature eliminates the threaded coupling and significantly reduces assembly time.
- Ideal for communication and industrial applications
- No coupling nut required. Interface facilitates quick assembly and provides for denser packaging
- Broad range of standard configurations including PCB, panel mount, flex and semi rigid cable, and adapters
| |
|
| SMA Connectors |
 | | - Rugged connector with threaded coupling mechanism designed for performance through 12.4 GHz (standard) and 18 GHz (high frequency)
- Meets all performance requirements for MIL-C 39012
- Uses industry standard crimp tools and processes
- Available with corrosion resistant, non-magnetic white bronze plating for low intermodulation
| |
|
| SMB |
 | | - Smaller alternative to SMA with performance to 4 GHz
- Avail in both 50 ohm (standard SMB) and 75 ohm (mini SMB) versions
- General applications include GPS, telephony and CATV
- Snap lock coupling allows for quick mating and un-mating
- Low cost assembly using crimp center contact
| |
|
| SMA/QMA RF Connectors |
| | - Rugged connector with threaded coupling mechanism designed for performance through 12.4 GHz (standard) and 18 GHz (high frequency)
- Meets all performance requirements for MIL-C 39012
- General applications include GPS, telephony and CATV
- Snap lock coupling allows for quick mating and un-mating
| |
|
