| Product Line | Commercial/Military | Features | Document(s) |
|---|
| Compression Coax Board-to-Board |
 | | - Superior performance thru 4 GHz
- Designed for blind mating
- Available in four sizes for varied board spacing: 14mm, 10mm, 6.65mm and 4mm
- Single connector design - no mating connectors needed
| |
|
| MMCX |
 | | - 35% smaller than MCX with excellent performance to 6 GHz
- 50 ohm design used in board-to-board and cable-to-board applications where space is a driving issue
- Meets interface requirements of CECC 22 340
- PCB through-hole, surface mount, edge launch, flexible and semi-rigid cable designs
- Offers one of the smallest conventional crimp terminations without special tooling
| |
|
| OSMM |
 | | - Smaller than SSMA
- Low RF to High Microwave Frequencies
| |
|
| OSMT/SSMT |
 | | - Extremely small surface mount connector with performance through 6 GHz
- Ideal for wireless communication systems, consumer, automotive and military/aerospace applications
- Interface allows 360° of rotation providing maximum PCB design flexibility and only 3mm mated height
- Provides optimal retention for applications where shock, vibration or cable flexure may be encountered.
- Operates with both 50 and 75 ohm flexible coaxial cable
| |
|
| OSSP Connectors |
 | | - Frequency - DC to 28.0 GHz
- 50 ohm Impedance
- Subminiature version of OSP
| |
|
| QSL RF Connector System |
 | | - Surface mount compatible
- Overall height < 10mm
- Single and three port QSL footprint 12.5mm D x 17.5mm W
- IP67 compatible designs available upon request
- Platform expandable for multiple ports and configuration options
| |
|
| SMP/SMPM |
 | | - SMPM offers 3.43 Center-to-Center Spacing
- SMP offers 4.32 Center-to-Center Spacing
- Superior performance to 40 GHz
- An ideal interconnect solution for board-to-board, and rack and panel applications where higher densities are required.
- Meets all Military DSCC interface specifications
- Push-on interface facilitates easier assembly and test with a positive snap-in feature indicating a fully mated connection.
- Full and limited detent and smooth bore shrouds avail. Also straight and right-angle designs for semi rigid cable.
| |
|
| SMT QuickGrip |
 | | - Solderless cable termination with exceptional RF performance to 3 GHz
- Ideal for wireless surface mount applications in handsets, pagers and personal digital assistants.
- Used in board-to-board and cable-to-board applications where space is a driving issue.
- Designed for high volume assembly using surface mount technology
- Accepts both flexible and semi-rigid 50 and 75 Ohm micro-coaxial cables
| |
|
| SSMA |
 | | - Smaller version of SMA series with performance beyond 40 GHz
- Designed for use with smaller diameter semi-rigid and flexible coax cable.
- Meets applicable MIL-39012 requirements
- Panel and bulkhead mount, strip transmission line type, and hermetically sealed configurations available
| |
|
| Switching Coax |
 | | - Performance to 2.4 GHz
- Durability of 30,000 cycles
- Floating Design (cable plug): No stress for the PCB of a phone
- Impedance Match 50 ohms: No loss between antenna and RF unit
| |
|
| Ultra Miniature (LEPRA/CON) |
 | | - Ultra miniature
- Threaded and Snap Lock Coupling
- Small Coax like RG196 and RG178
- Slide-on connectors
| |
|
| UMCC |
 | | - Ultra low profile (2.0mm or 2.5mm maximum mated height)
- 360° mated rotation
- Small footprint on PCB (3mm x 3mm)
- Excellent performance to 6 GHz
| |
|
