 |
ARINC Coax Products
These avionics connectors feature significantly reduced mating forces and in addition to commercial avionics, aircraft data networks and in-flight entertainment systems, this contact system can be used in military networking and communications as well as multi-gigabit applications like Gigabit Ethernet IEEE 802.3Z and Fibre Channel XT11.2.
|
 |
C Series
Medium size connector with bayonet-locking coupling for quick connect/disconnect termination. Having a constant impedance of 50 ohms, this connector is available in both standard and weather-proof versions and offers excellent performance at frequencies up to 11 GHz.
|
 |
Cable Terminations
Coaxial soldersleeves provide a reliable method for attaching one or more ground taps to shielded wire and/or terminating the braid of shielded wire for a wide range of cable sizes.
|
 |
CATV Indoor/Outdoor Taps
Tyco Electronics offers a complete range of Community Antenna Television (CATV) Taps. They are available in Indoor and Outdoor versions. All of them can operate in a very wide frequency bandwidth from 5 MHz to 1 GHz.
|
 |
CERTI-SEAL Coax Coupling Closure
Enclosure designed for direct buried splicing of coaxial cable typically found in CATV service drops.
|
|
Coax Shielded Wire Crimp (Termashield)
Solderless termination method for attaching one or more ground taps to shielded wire and/or terminating the braid of shielded wire.
|
 |
Coaxial Snap Lock (Auto)
This info is still under construction . . .
|
 |
Decoupled BNC
Drop-in replacement for standard BNC printed circuit board connectors. Built-in chip capacitors filter high-frequency noise to panel ground providing a fast, sure way to reduce noise and eliminate ground loops on coaxial interconnections.
|
 |
Miniature Threaded
Low frequency miniature connector designed for one stroke crimping of inner conductor, outer braid and cable support.
|
 |
OS-50 (2.4mm)
Designed originally for broadband test equipment, this rugged, high performance subminiature series offers mode-free operation thru 50 GHz.
|
|
OSMM
Smaller than SSMA, its typical applications include requirements from low RF to high microwave frequencies. The higher order moding for this series is above 450GHz, but the primary feature is its microminiature size.
|
 |
RF Coax Strain Relief Boots
Durable PVC protective boots available in range of colors and sizes, and suitable for RG series cables.
|
 |
SHV
Lightweight, weatherproof connectors designed to provide shielded disconnects for high-voltage applications up to 5,000 volts DC.
|
 |
SMC
Medium sized 50 Ohm threaded connector that meets MIL -C-39012 specifications and has excellent performance at frequencies up to 10 GHz.
|
 |
Thinnet Tap
The Thinnet Tap System offers an easy installation of the Tap and virtually eliminates disruption of the network during disconnection of a terminal for moves or services.
|
 |
Twin BNC
Miniature quick connect/disconnect, weatherproof connector with bayonet coupling designed in accordance with MIL-C-39012 to meet the stringent requirements of MIL-STD-1553 Multiplex Data Bus.
|
 |
Twin Threaded
Ruggedized threaded connectors and plugs accommodate today's most commonly used twin conductor coax cable sizes. Reduced noise levels and lower applied assembly cost because of solderless crimp design.
|
 |
Twinax and Triax
Used with twinaxial and triaxial cable where low noise and maximum RF shielding are required. Available in field replaceable weatherproof designs with polarized keyways.
|
 |
UHF/Miniature UHF
Available in miniature and standard sizes, this connector has found wide acceptance, particularly in the mobile communications field. Low initial cost and low applied cost, coupled with performance capabilities up to 500 MHz (standard) and 2 GHz (miniature) are a few of the benefits these connectors offer.
|
 |
Ultra Miniature (LEPRA/CON)
Ultraminiature connector series with unique helically-wound center contact is available with both threaded and snap-lock coupling mechanisms. Designed to be used with smaller size coaxial cables RG196/U and RG178/U, they are well suited to telecommunications and instrumentation applications.
|
